| After-sales Service: | Support |
|---|---|
| Warranty: | 12 Months |
| Certification: | RoHS, ISO 9001:2000, ISO 9001:2008, CE, CCC, DOT, EPA |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
More than 100 models are available, including Garbage Tricycle, Sanitation Tricycle, Freezer Tricycle, Motorized Driving Type Refrigerator Tricycle, tricycles for either passengers or cargo, mobility scooters, four-wheel vehicles, garbage collection carts, and special ones. Three-wheelers are stable and quiet while riding. They are very suitable for older people and people with balance and mobility difficulties. Some models are equipped with powerful motors, suitable for short trips of carrying goods in households, warehouses, stations, and ports.
| Dimension(LXWXH)mm | 3400X1320X2140(±50mm) | ||
| Cabin Dimension(LXWXH)mm | 2000X1200X1250(±10mm) | ||
| Load weight | 900kg | ||
| Total mass | 910kg | ||
| Wheelbase | 980 mm | ||
| Wheelbase | 2320 mm | ||
| Effective volume | ≥2.5m³ | ||
| Speed | Low speed≤15, high speed≤35 | ||
| Range | 80km | ||
| Battery capacity | 180B water battery or optional maintenance-free | ||
| Standard voltage | 60V | ||
| Traveling motor, power | Maintenance-free brushless motor 3000W | ||
| Hydraulic motor power | 800W | ||
| Hydraulic oil pump noise | ≤100db | ||
| Carriage lifting time | ≤13s | ||
| Tipping barrel lifting time (empty barrel) | ≤15s | ||
| Tumbling barrel descending time (empty barrel) | ≤10s | ||
| Tire size and requirements | Front-wheel 450-12, rear wheel 500-12 | ||
| Front Shock Absorption | Weighted inner and outer spring hydraulic telescopic tube type iron shock absorber | ||
| Front steering casing structure | Directional shaft sleeve wall thickness 4mm sleeve | ||
| Carriage Material Structure | The front thickness of the bottom plate is 1.8mm. ≥8cm for the waterproof sealing area, rear and side panels are made of 1.5mm cold rolled plate and the treatment. | ||
| Sealing Methods and Buckles | The compartment is equipped with a top cover, the back door is equipped with a sealing strip to prevent sewage leakage, and the buckle is an adjustable tightening buckle. | ||
| Electric control system | 60V36 tube dual-mode intelligent controller | ||
| Travel Controls | Turning handle | ||
| Driving mode | Steering handle type | ||
| Brake System | The vehicle adopts a foot brake hydraulic braking system and a misoperation power-off system. | ||
| Brake System | Foot hydraulic drum + manual parking | ||
| Cab Material and Lamps | Steel structure, safety cab is made of mold stamping cold plate material, front integrated embedded LED headlight, injection molded instrument workbench with wiper, warning light, foot pedal in the cab is made of leather plate, flat pedal. | ||
| Cab Structure | Integral stamping cab (optional cab door). | ||
| Cabin Door,Cabin Cover | Side-opening rear door can be opened to the right side of the box by 270°, with the side upper door on the side of the bucket tumbler, and the lid is made of a 1.2mm cold rolled plate. The upper lid opening mode is upward-opening type on one side of the drum tumbler, and the compartment door adopts a double adjustable latch. | ||
| Wire Harness Assembly | High and low voltage double lines: high-temperature line 10 square meters in high voltage and 1 square meter in low voltage. | ||
| Drive Axle | Adopt load chainless full suspension with high and low-speed truck-type rear axle: large diameter brake drum, 30mm diameter thickened half shaft, hydraulic drum brake. | ||
| Rear Suspension | Adopt main and auxiliary spring steel total of 2 groups. A single group of 11 pieces with an auxiliary spring bracket, greatly improves the load capacity. | ||
| Fuel line layout | Bucket turner rail with steel high-pressure oil pipe and hose pressed butt, and fixed with special pipe clamps, | ||
| Bucket Hanger Limit Method | Bucket hanging down to the bottom of the limit pin. | ||
| Hydraulic control valve | Adopting two multi-way valves with microswitch, the switch works synchronously with the oil pump and the control valve is mounted on the right side seat bucket in the cab. | ||
| Hydraulic control valve control mode | The hydraulic control valve with a linkage switch and oil pump work synchronously. | ||
| Bucket-turning track material and structure | The main track is a thickened steel pipe, and the guide wheel of the bucket is a built-in needle bearing. | ||
| Bucket tipping device fixing method | Bucket rail is fixed on the carriage, bucket lifting and overturning mechanism and the carriage adopts the split connection method. | ||
| Bucket turning device | Upper-mounted double cylinders, together with 10mm iron plate symmetrical hangers. The turning angle of the bucket is ≥138° to ensure the clean dumping of garbage. | ||
| Bucket hanging requirements | Matching with national standard 120L and 240L garbage cans. |
||
| Bucket cover lever | Adjustable fixed type. | ||
| Bucket turning mechanism | The rotating axle has an outer diameter of 34mm and an inner diameter of 24mm seamless steel pipe shaft, and the support gland of the axle is 6# channel steel of national standard. | ||
| Pail lifter | There are anti-deformation protection devices, the boom on the lower end of the fixed pin is 8.8 grade. | ||
| Hydraulic power unit | Adopt a 60V DC motor and oil pump integrated connection. | ||
| Frame material | The beam is made of an 80*40*3.5mm rectangular tube with cathodic electrophoresis anticorrosion and antirust treatment. | ||
| Maximum Climbing Degree | ≥15°. | ||
| Battery Pack Placement | The bucket turner is placed in a counterbalanced counterweight on the left side of the opposite parallelepiped. There is a waterproof cover plate on the top of the battery pack. | ||
| Cylinder type configuration | Single-stroke double cylinders are used for bucket tippers, and the single-stroke one-way thicker cylinder is used for carriage lifting. | ||
| Oil pipe and line layout | Arranged on the side of the frame, not on the bottom of the frame, to prevent driving by the road surface of foreign objects mixed off. | ||
We were established in 2015, focusing on the production, research development, and sales of new energy vehicles. We are looking for overseas distributors and agents for our products. If you have any questions, please feel free to contact us.
1. Q: Can I get samples?
A: Sure. We are honored to offer you samples for quality check.
2. Q: How do you control the quality?
A: We take pre-production, in-line, and final inspections to ensure all the machines can meet the quality standard for worldwide customers.
3. Q: Do you have products in stock?
A: Sorry. All products have to be produced according to your order including samples.
4. Q: What is the delivery time?
A: Usually 15-30 days according to different models.
5. Q: Can we customize our brand on products?
A: Yes, we can customize your brand according to your LOGO.
6. Q: How about your product quality?
A: We always insist on making every product with our heart, paying attention to every detail, to provide customers with the best quality products. We do have a strict quality control process and 100% testing before delivery.
){kind=link}